BOPP+EVA Thermal Laminating Film for Offset Printing-24mic

BOPP+EVA Thermal Laminating Film for Offset Printing-24mic

*Content

Floor layer: BOPP
Glue layer: EVA adhesive

*Specification

Thickness: 18mic/20mic/22mic/23mic/24mic/25mic/27mic/28mic/30mic/35mic
Width: three hundred~1800mm
Duration: two hundred~3000m
Paper main: 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches)
Bonding: Considerably less than two

*method parameter:

Gear for thermal movie: Dry and soaked film laminator
Lamination temperature: 95~105c
Roller stress: ten-20mpa
Speed: eight-20 m/min

*directions for utilizing BOPP thermal laminating movie:

Standard approach temperature is 90c-105c, roller force and temperature range with diverse types of paper, ink and EPTs.
When utilizing the film for the initial time or do other therapy, consider a small volume before mass laminating.
Make sure the ink is dry before laminating. It will delaminate when the paper contains also significantly moisture and powder.
Make sure place the content in a low-temperature, dry spot.

*EPT:

SPECIFICATION 20mic 22mic 24mic 25mic 27mic 28mic 30mic
GLOSS GLOSS GLOSS GLOSS GLOSS GLOSS GLOSS
THICKNESS (mic) Foundation 12 12 12 fifteen 15 18 18
ADHESIVE 8 10 twelve ten twelve ten 12
Whole twenty 22 24 twenty five 27 28 30
WEIGEPT m2/kg fifty four.three forty nine.3 45.045 forty three.38 forty.11 38.789 36.15
kg/m2 .01844 .57132 .5712 .57105 .57193 .57178 .57166
WIDTH(mm) 300mm-1800mm
Length(m) 200m-3000m
PARER Core 25mm(1inch),58mm(two.25inches),76mm(3inches)
BONDING Less THAN 2

SPECIFICATION 25mic 27mic 28mic 30mic
MATT MATT MATT MATT
THICKNESS (mic) Foundation 15 15 eighteen eighteen
ADHESIVE ten 12 ten twelve
Whole twenty five 27 28 30
WEIGEPT m2/kg 44.25 41 forty 37
kg/m2 .5716 .5714 .5712 .5711
WIDTH(mm) 300mm-1800mm
Size(m) 200m-3000m
PARER Main 25mm(1inch),58mm(two.25inches),76mm(3inches)
BONDING Much less THAN 2

BOPP+EVA Thermal Laminating Film for Offset Printing-24mic

BOPP+EVA Thermal Laminating Film for Offset Printing-24mic