rubber powEPTmilling EPTry scrap tire crusher EPT scrap tire granules
The EPT tire recycling EPT will be managed by the PLC, all the resources will be process inside of of EPTs, there is Actual ZERO Pollution. one labor, one engineer can operate all the EPTs, no need to run the EPTs, just manage the PLC. the EPTs can safeguard the EPTs, work the EPTs and preserve the EPTs function effortlessly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC computerized handle program, with automatic reversal control method in overload problem. Two-shaft tire crusher is EPTly made for outdated tires with reduced speed and substantial torque to decrease noise and EPT usage.
The blade of the shredEPTis produced of high high quality steel and subjected to Bodycote heat therapy to attain the greatest crushing efficiency.The shredEPTis straightforward to disassemble and alter cutter blade and suitable for tearing large, additional thick and challenging resources.The thickness range of the crushing blade is 25mm-152mm according to the tire type,output and final solution. The grinEPTcan procedure OTR tires,big truck tires,automobile tires and so on at the speed of one-30tons whithin one hour.
| Design | Enter dimension | Output dimension | Cappacity | Motor | Blades amount | Dimensions | Fat |
| TS-800 | 800mm | fifty*50mm | one-2T/h | two*22kw | 16pcs | 4*2.6*3.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | 3-5T/h | 2*37kw | 20pcs | four.8*2.eight*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | six-8T/h | two*45kw | 16-30pcs | five*two*three.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | 7-10T/h | two*55kw | 20-24pcs | five.6*two*3.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | ten-15T/h | 2*75kw | twenty-30pcs | 6*two.4*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | 20-30T/h | two*110kw | sixteen-24pcs | 7.four*3.two*five.2m | 56T |
2.Rasper
EPT tire shredding technique is developed to generate up to 6 tons for each hour of wire free of charge rubber mulch.This method creates up to a 99% wire free of charge chip ranging in measurement among 12-25mm relying on the preferred dimensions.After processing,the steel is taken out by our magnetic separation system.At this stage,the wire free rubber chips are all set to be colored and employed for landscaping mulch and the steel is completely ready to be baled and sold to smelters.
| Rasper | Motor | EPT | Ability | Dimensions | Excess weight | Cutting chamber | Ultimate product |
| R45 | Siemens | 45KW | 300-500kg/H | 1.four*1.two*two.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | 1.7*one.seven*2.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | 700-1T/H | 2*two*4.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | one-one.5T/H | 2.one*two.one*four.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | one.5-3T/H | two*two.five*4.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.2*two.one*three.6m | 12400kg | 697*1562mm | 10-30mm |
3.Granulator EPT
Squander Tire Recycling Rubber Granule Producing EPT is adopting bodily recycling approach and is designed to grind the rubber mulch from the rasper into modest granules as good as one-6mm. The granules are screened and re-circulated right up until the wanted dimension is attained. This Fully-Automatic Tyre Recycling Line working in typical temperature, no want to incorporate any other chemicals, no air pollution to the setting. This is the best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capacity | three hundred-500kg/h | 500-800kg/h | 800-1500kg/h |
| Proportions | one.eight*one.6*two.4m | 1.eight*one.nine*two.4m | 2.2*2.3*3m |
| Closing item | one-6mm | one-6mm | 1-6mm |
4.Miller
Rubber powEPTis the last end result of ambient tire recycling.At this phase,crumb rubber is floor down into a cleanse powEPTform with nearly all steel and fiber taken out.Rubber powEPThas many secondary utilizes from injection molding goods,coatings,roofing supplies and various asphaltapplications.
Rubber powEPTis normally located in forty-74 microns(.forty-.74mm) in measurement.This micron dimensions metarial has the gain of getting incorporated into new or eXiHu (West Lake) Dis.sting formulations for numerous polymers and completed items.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter merchandise | Heavy obligation truck tyres to bicycle tyres | |||
| Enter measurement | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output measurement | shred to thirty-120 mesh rubber powder | |||
| Potential | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
Mob 151366 0571 six
FAQ:
Q1,Are you a manufacturing unit or a buying and selling business?
A. We are a company with thirty years production encounter in tire recycling EPT. We have export license, we can provide you the manufacturing facility rates.
Q2. Can you guarantee the ability as you mentioned ?
A. Definitely sure,besides that,we also provide three-5years guarantee.
Q3, are you sure the final rubber powEPTcan be totally cleanse out of wire metal or nylon ?
A. The closing powEPTpurity can reach ninety nine.nine%. we have magnetic separator which can independent the wire steel from the rubber powder.
