recycling squander tire to rubber powEPTgranules EPT recycling utilised rubber wheels

The EPT tire recycling EPT will be controlled by the PLC, all the resources will be procedure within of EPTs, there is Real ZERO Air pollution. 1 labor, 1 engineer can run all the EPTs, no require to work the EPTs, just control the PLC. the EPTs can safeguard the EPTs, function the EPTs and keep the EPTs work efficiently.

Specification

one.Tire shredEPTEPT

The Rubber ShredEPTEPT adopt PLC computerized control method, with automated reversal manage method in overload situation. Two-shaft tire crusher is EPTly created for old tires with lower speed and higher torque to lessen sounds and EPT usage.

The blade of the shredEPTis made of high high quality steel and subjected to Bodycote warmth remedy to obtain the greatest crushing overall performance.The shredEPTis straightforward to disassemble and alter cutter blade and appropriate for tearing large, extra thick and challenging materials.The thickness range of the crushing blade is 25mm-152mm in accordance to the tire sort,output and ultimate item. The grinEPTcan approach OTR tires,large truck tires,automobile tires and so on at the velocity of 1-30tons whithin one hour.

2.Rasper
EPT tire shredding system is made to produce up to 6 tons for each hour of wire totally free rubber mulch.This method creates up to a 99% wire cost-free chip ranging in measurement in between twelve-25mm based on the desired dimensions.Right after processing,the steel is eliminated by our magnetic separation method.At this stage,the wire cost-free rubber chips are ready to be coloured and utilised for landscaping mulch and the steel is ready to be baled and marketed to smelters.

three.Granulator EPT

Squander Tire Recycling Rubber Granule Generating EPT is adopting physical recycling strategy and is created to grind the rubber mulch from the rasper into tiny granules as wonderful as one-6mm. The granules are screened and re-circulated till the desired measurement is arrived at. This Fully-Computerized Tyre Recycling Line managing in standard temperature, no require to add any other chemical substances, no air pollution to the setting. This is the best way to recycling scrap tires.

4.Miller

Rubber powEPTis the ultimate end result of ambient tire recycling.At this phase,crumb rubber is floor down into a clear powEPTform with practically all metal and fiber taken off.Rubber powEPThas several secondary employs from injection molding merchandise,coatings,roofing components and numerous asphaltapplications.

Rubber powEPTis usually found in forty-74 microns(.forty-.74mm) in dimensions.This micron size metarial has the gain of currently being integrated into new or eXiHu (West Lake) Dis.sting formulations for different polymers and concluded items.

Mob 151366 0571 6

FAQ:

Q3, are you sure the closing rubber powEPTcan be completely clean out of wire metal or nylon ?
A. The ultimate powEPTpurity can attain 99.nine%. we have magnetic separator which can different the wire steel from the rubber powder.

Computerized tire recycling EPT/tyre shredEPTEPT

Tire debeader

The initial step in tire recycling procession
Weighty obligation human body
Hooks and cross pulling die made of 45# metal, tempered and quenched
Equipped with protection frame avoiding the hazards throughout working
Two collection: Hydraulic a single and mechanic a single
Effortless to function and adjust spare components (hooks and cross pulling die)
Tire cutter

Reducing tires into parts ahead of shredding
Little tire items are less complicated to procedure in shredder
Knives manufactured of YG-20 steel, EPT making use of time
Hydraulic management
A single clamping cylinEPTand a single cutting cylinder
Equipped with a roller platform to process large tires
Tire shredder

The substantial-capability shredEPTwas EPTly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for direct dimensions reduction of tires into cleanly minimize tire chips, dimensions 50×50 mm. Slicing shafts for the creation of greater tire chips are offered high torque at low pace cut even the strongest tires into pieces.
All construction traits are made for ongoing operation in orEPTto achieve highest throughput rates at most affordable charges.
Incredibly exact tolerances in between the reducing knives create cleanly minimize tire chips at reduced power usage.
The slicing knives made of high top quality alloy steel can be re-sharpened and reused which will increase the provider existence and decreases the running fees.
The full reducing chamber is lined with tough wear plates.
Massive doorways allow for effortless accessibility into the chopping chamber.
Tire cracker

The shear in between the two rollers will make tire chips into powders as nicely loosen rubbers, steels and textiles
Roller human body made of cast steel
Surface of roller made of alloy steel, welded when worn out
1 flat floor roller and one teethed roller, high throughput of powders
Bottom produced of cast iron
Unexpected emergency end when overload
Length in between the two rollers can be adjusted.
Tough equipment EPT
Outfitted with screening EPT, magnetic separator and fiber separator, 99% purified rubbers will be obtained.
Finals: eight-30 mesh
Magnetic separator

Final Merchandise(5-120 mesh tyre powder), As photo:
The exact same time, Tyre powEPTis extensively use in numerous sector. It can make rubber tile, reclaimed rubber, vehicle part Ect other individuals.

two-Reclaimed rubber Making Line From Tyre Powder:

one. Dynamic desulfurization tank (1 sets

Product Identify
Dynamic desulfurization tank
Model technical specs

two. Open miXiHu (West Lake) Dis.ng mill (you want two-3 sets)

1. Diameter of roller: 450mm

two. Functioning length of roller: 1200mm

3. Speed of front roller: 24.26m/min

4. Friction ration of two rollers: one: 1.27

five. Max gap: 15mm

6. Capacity: 25-50kgs

7. Wieght: 2000kgs

8. Motor EPT: 55KW

nine. Dimension: 6150*2280*2000mm

3. Rubber refiner( one sets)

one. Front rolle diameter: 480mm (drum )

two. Rear roller diameter: 612mm (drum)

3. Functioning duration of roller: 800 mm

four. Entrance roller linear velocity: 22.97m/min

5. Velocity ratio of 2 rollers(entrance/rear): 1: 1.82

6. MAX Hole: 15mm

seven. Motor EPT: 55KW

eight. Dimension: 4700*2100*1480mm

Closing EPT(RECLAIMED EPT):