1000kg/h higher output minimal noise tyre shredEPTrecycling EPT
Capabilities:
Automated tire recycle EPT is employed to crush the squander tire into various dimension of rubber
powder. Environmental protection and energy preserving, Market place Prospect Broadness .
Stream chart:
Major EPTry of the EPT:
Use: Shredding the tire shreds to eight-12mm rubber granules
Design | PSJ-900 Rubber Grinding EPT |
Dia Principal shaft | 200mm |
Rotating Pace | 350Rpm |
Knives | Movable Knives:54pcs |
Fastened Knives:6pcs | |
Grinding Chamber | 920x540mm |
Enter Dimensions | 50x50mm scrap tire blocks |
Output Dimension | eight-12mm |
Capability | a thousand-1500kg/h |
Cooling Syatem | Air cooler |
EPT | ZDY160-four.5-II |
Excess weight | 4500KG |
EPT | 58KW |
Dimension | 2000X1550X2406MM |
SL-1200 Double Hooks Tire Debeader
use:The tire debeaEPTis utilized to remove the steel wire ring of the waste tire
Product | Capability(computer/h) | The outer diameter (mm) | EPT(KW) | Pulling Drive(T) | Excess weight(T) | Dimension(M) |
SL-1200 | sixty-1200 | 800-1200 | fifteen | 30 | 6.5 | two.47×1.69×1.forty nine |
ZPS-1200 Tire Shredder
Use :Shred the waste tire to 50x50mm tire shreds
EPT | 90kw | Potential | 2000-4000kg/h |
Feeding dimensions | significantly less than 1300mm | Output size | le 60x60mm |
Sieve revolving speed | thirteen r/min | Bodyweight | 17.5T |
PSJ-900 Rubber rotating grinder
Use: Shredding the tire shreds to eight-12mm rubber granules
Model | PSJ-900 Rubber Grinding EPT |
Dia Major shaft | 200mm |
Rotating Pace | 350Rpm |
Knives | Movable Knives:54pcs |
Set Knives:6pcs | |
Grinding Chamber | 920x540mm |
Input Dimension | 50x50mm scrap tire blocks |
Output Dimensions | eight-12mm |
Potential | a thousand-1500kg/h |
Cooling Syatem | Air cooler |
EPT | ZDY160-four.five-II |
Weight | 4500KG |
EPT | 58KW |
Dimension | 2000X1550X2406MM |
CSJ-600/800 Rubber Crusher
Use: Crush the eight-twelve mm rubber granule to 1-five mm
Design | CSJ-600 | CSJ-800 |
Capacity(kg/h) | 300-four hundred | five hundred-800 |
EPT(kw) | thirty | 37 |
Excess weight(kg) | 1200 | 1600 |
CXFJ-28 Rubber wonderful mill
USE:Grind rubber granules into tremendous wonderful rubber powders
Design | Feeding Measurement(mm) | Output dimension(mesh) | Capacity (kg/h) | EPT(kw) | Fat(kg) |
CXFJ-28 | one-4 | 30-100 | forty-a hundred and fifty | 30.two | 1050 |
Why select us
one.Our items are all cost-successful with high good quality and good efficiency.
two. Modernized technologies cEPTr and expert engineers
three.Substantial effective and personal pre-sale service and client provider.
Item Use:
five-10 mesh (about two-four mm) rubber granule:
School playground, athletic observe,rubber floor/tiles
ten-20 mesh:
rubber floor tile, plastic runway, tennis court, basketball courtroom, volleyball court docket, golf course
30-40 mesh:
Reclaimed rubber, Modified asphalt additives,rubber gloves ,and so forth.
60-eighty mesh:
Sleepers, rubber sheet, waterproofing supplies, reclaimed rubber, tire inner pad, slow highway arch, sealing strip, buffer, plastic foam, pearl pads, rubber piston.